Tag Archives: Dayboat

Torturing plywood and myself as well

Posted on by

Well finally got all of the chines, battens and inwales fitted; so it was time to start sheathing the bottom with the 3/8″ ply. I had expected the bow panels to be difficult to fit as the plywood has to twist through 90 degrees. Not an easy thing to get plywood to do. It wasn’t going too bad making the templates and indeed getting the ply to fit loosely seemed doable and I left them like that for 2 days, to take the shape and they did.

Planking so far

Planking so far

But when I started to clamp it down into position that’s when the fun started with slipping clamps and more than once I got a slap in the face as the ply sprang out from under a clamp and I broke a panel, it went off like a gun shot. After struggling like this for way too long I decided to go for it an glue and nail the panel into place. The first one was actually okay to do but when I was half way through the second one it decided to explode. You can take it for granted that at this stage I was trawling through some pretty rude sailor talk to come up with an expletive I hadn’t used in the previous two days. Anyway back to my fine mess of glue and broken ply. I just had to call it a day. I walked out the workshop door and I realised that more than once I looked at the solution. It was a plain as the nose on my face but not as ugly. Rotate the ply by ninety degrees so that there were more veneers with the grain parallel to the bend than against it. That simple. And it was that simple. I redid this on the broken panel and it went in no bothers. Well I suppose it was the third or fourth time I had done it. The rest of the bottom planking went on without much fuss at all. I’ve started planking the top sides today and have the motor well framed out. As bob the builder says Yes we can.

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home

Slow Progress but progress all the same.

Posted on by

The past week has been slow going. Lots of distractions sick baby, runaway dog and Féile Átha Dá Chab. However I did manage to get the keel and stem fabricated, all the frames made and set up ( more on that later). So I suppose I have been getting stuff done. Uh Oh, I feel a Waldorf and Statler moment coming on

Actually now that I think about it I haven’t done that bad. Except for a rather stupid mistake where I checked a dimension three times and got it wrong three times, nice. It’s very easy to turn 784mm into 748mm. I should have stuck to the axiom that if it looks right it is right and the corollary that if it looks wrong it is wrong. Well the new number 9 frame is just dandy. Anyway here’s a photo of progress so far.

framesetup

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home

Assembling Frames

Posted on by

I have been very busy finishing this project and building the boat. Despite this I’ve been able to fabricate the frames and bevel them; now all that remains is to assemble them. I am about halfway through at this stage. The temporary cross beams have to be attached and the excess glue and fingerprints sanded off before they can be set up on the strongback. Here’s a photo.

frames

Behind the doors is my new extension.

And just to keep me organised a list of things to do before setting up the frames.

  1. Finish glueing up frames and bulkheads
  2. Decide location of and plane,cut and attach cross beams,
  3. Scarf up chines, battens, inwales and apron,
  4. Shape, joint, bevel and assemble keel
  5. Build and level strong back

Oh boy that’s a lot of stuff to get done so I’m off.

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home

RTE radio covers Roeboats

Posted on by

Quick post to let you know that Roeboats was mentioned on Seascapes Irelands national adio programme covering all thing marine related. You can listen here it’s about 15 minutes into the programme. Hopefully there will be more to follow.

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home

Finished Lofting!

Posted on by

Finally finished lofting Ninigret. I had to spend some time finishing up outstanding jobs that I had on as well. With the lofting complete, I now have all the frame and stem bevels, and transom projected so it will be full steam ahead making from now on hopefully. Here’s something of interest, I came across this at Woodenboat; it was their boat of the week. It really appealed to my conceptual sensibilities, I have always been a fan of people like composer John Cage and the Fluxus group. Anyway here’s a picture of an unmanned boat that can “sail” directly into the wind. Quite a technological feat really. I think it looks fantastic maybe we should all be building boats like this.

Windvinder

Windvinder

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home

Lofting Ninigret 22′ Dayboat

Posted on by

Well I’ve spent the last few days lofting the lines and construction plan for Ninigret; the 22′ fuel efficient day boat I’m building. It’s been a long time since I did a lot of hand drafting; makes you appreciate the convenience of computer modelling. I would do it on the computer but the old girl isn’t up to running up to date software. Anyway the lofting is going pretty well. I decided to loft to a one quarter scale as it was big enough for details and I could store the finished drawing easily for future reference. I’ll have to loft the stem and body plan full size but that won’t be too difficult either. Here are some photos of work in progress.

lofting

As you can see I’ve used different colours to make the drawing easier to read. Once the frames and stem are lofted I’ll start lifting the bevels and making up the frames. I’ve decided to use Resorcinol glue for the Oak frames as epoxy doesn’t like tanin that much and the dark glue lines won’t be noticed.

lofting2

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home

Ningret 22′ Eco friendly motor boat.

Posted on by

You can see Roeboats finished Ninigret here

Roeboats have just been commissioned to build a Ninigret 22′ motor boat designed by John Atkin. I am really looking forward to building this great looking boat. John Atkin really knew his stuff; I’ve been going through the plans and and there is nothing on this boat that that is superfluous; yet it still boasts a large cockpit, two berths and a sea toilet (head). Primarily what attracted me and my client to this boat were its good looks; but it has many other great features. One of these was the fact that the motor is housed in a covered well thus reducing noise and protecting the cockpit from following seas.

Profile drawing from www.atkinboatplans.com

Profile drawing from http://www.atkinboatplans.com

Ninigret rides flat and with her fine entry should have no trouble slicing through choppy waves ensuring a dry and comfortable ride. The 25 to 45 horse power outboard under the hatch at the aft end of the large cockpit drives the boat to speeds from 15 to 25 knots which is plenty fast for heading to your favorite fishing spot or beach. The fact that this boat not only has a large cockpit but two berths and a head is really amazing and a credit to the designers ingenuity and creativity. Being a designer myself I can appreciate the hours and hours of thought and sketching that must have been done to produce such a classic. I’ll be documenting the construction of Ninigret here in the future. Here’s a photo of John Atkin in his own Ninigret built in the 80′

Contact Tiernan Roe on +353 (0)28 38973 to discuss your own Ninigret. We are now delivering worldwide also. So don’t delay order now to guarantee delivery for summer 2015

Tús maith, leath na h-oibre

Posted on by

A good start is half the work. Well let’s hope this old saying or seanfhocail holds true. I thought I might start at the beginning and show you some views of where Roeboats is located. We’re located just off the N71 in the leam a mhádra (dog’s leap) valley overlooking Roaringwater bay and the Fastnet_Rock. I’ve been living in this area for almost ten years and as you can see it’s an easy place to stay in.sunnyhouse1

I moved to West cork to build boats but got a little sidetracked and have been making fine wooden funiture for the last ten years instead. Check out my furniture at Tiernan Roe Fine Woodworking, as you can see I’m a big fan of blogs. However I aim to update this blog a lot more frequently.sunnydrive1

Previous to moving to West Cork I worked in Berlin and Dublin as a special effects model maker making tings like rubber armour and 9metre 35′ statues of liberty for the top of Checkpoint Charlie on the old Berlin wall. Which was very interesting and used a lot of the skills needed in boatbuilding like mold making, fibreglass fabrication and some complex wood work; one project recreated the art nouveau interior of Maxim’s restaurant in Paris.

Roeboats, Ballydehob, Co. Cork, t:+353 (0)28 38973 m: +353 (0)86 158 69 37 e:roeboats@ymail.com

Home